Welcome to MegaOhm Motorsports! Use FREESHIPPING at checkout when buying 2 or more select items!

P3 Digital Vent Gauge

$389.00 - $489.00

We have partnered with P3 Gauges to offer this custom integrated, multifunction digital gauge for your F150! Below are the features. We will be updating this product page soon with a link to the instructions and Powerboost Specific configuration.

You can order this gauge in 3 different configurations:
Just the gauge
• Just the gauge will ship to you and you will remove your vent, disassemble it, and install it yourself. About a 3/10 on the difficulty scale.
Preinstalled in vent with wheel under vent
• You will receive a brand new vent with a gauge preinstalled, and you will retain flow blocking control via the wheel under the vent. Installation time is cut in 1/2 with this option
Preinstalled in vent without flow control
• Simply slide the vent left or right to control flow instead of the wheel

We also offer this gauge for many other makes and models. Simply contact us if you do not see your make and model in the drop down.

P3 V3 Gauge Features
• Plug and Play Install - plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
• OEM Integration - installs in your vent for a sleek install while retaining air flow
• Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
• Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units)
•Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
•Coolant temperature
•Air/Fuel ratio
(can be read in AFR or Lambda)
•Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
•Intake air temperature
•Throttle angle
•Ignition timing
•Engine RPM
•Exhaust gas temperature
•Battery voltage
•Transmission Temperature
•Programmable shift light
•Analog input 1
(brown wire) can allow gauge to read any 0-5 volt linear output sensor
•Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
•Acceleration timers (0-60mph/0-100mph/60-130mph)
•Braking timers (60-0mph/100-0mph)

You Asked, we answered.
Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't.
No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem!
Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too.
We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment.

RECOMMENDED ADDITIONAL ACCESSORIES
OBD2 Splitter
Trim Removal Tool Kit

HIGH PERFORMANCE ACCESSORIES
Ethanol Sensor Voltage Adapter
Trim Removal Tool Kit

This product does not qualify for free shipping